Код ошибки.

[Angru86]

Подскажите пожалуйста код ошибки P0341 и SRS:56-31 потери связи с PCM, ABS:83-1 неисправность PGM-FI.
Горит чек и vsa tsa.
Коды сказали на диагностике.

 

[Korsar]

вот по трактовке Р0341

DTC Troubleshooting: P0341 (57)
DTC P0341: CMP Sensor and CKP Sensor Incorrect Phase Detected





1. Turn the ignition switch ON (II).



2. Do the DTC CLEAR in the CLEAR MENU with the Honda PGM Tester or the HDS.



3. Start the engine.



4. Check for Temporary DTCs or DTCs in the DTCs MENU with the Honda PGM Tester or the HDS.

Is DTC P0341 indicated?



YES - Go to 9.



NO - Go to 5.




5. Do the VTC TEST in the INSPECTION MENU with the Honda PGM Tester or the HDS.

Is the result OK?



YES - Go to 6.



NO - Go to 9.




6. Test-drive at a steady speed between 30-60 km/h (19-38 mph) for 10 minutes.



7. Check the VTC STATUS in the DATA LIST with the Honda PGM Tester or the HDS.

Is it ON?



YES - Go to 8.



NO - Go to 6 and recheck.




8. Monitor the OBD STATUS for DTC P0341 in the DTCs MENU with the Honda PGM Tester or the HDS.

Is it FAILED?



YES - Go to 9.



NO - If it is PASSED, intermittent failure, system is OK at this time. If it is NOT COMPLETED, go to 6 and recheck.



9. Turn the ignition switch OFF.



10. Test the VTC oil control solenoid valve.

Is the VTC oil control solenoid valve OK?



YES - Go to 11.



NO - Replace the VTC oil control solenoid valve, then go to 14.




11. Check the camshaft timing.

Is the camshaft timing OK?



YES - Go to 12.



NO - Time the camshaft, then go to 14.




12. Check for damage to the cam chain.

Is the cam chain damaged?



YES - Replace the cam chain, then go to 14.



NO - Go to 13.




13. Inspect the VTC actuator.

Is the result OK?



YES - Go to 14.



NO - Replace the VTC actuator, then go to 14.



14. Turn the ignition switch ON (II).



15. Do the ECM/PCM RESET in the CLEAR MENU with the Honda PGM Tester or the HDS.



16. Do the CKP PATTERN CLEAR in the CLEAR MENU with the Honda PGM Tester or the HDS.



17. Do the ECM/PCM idle learn procedure.



18. Do the CKP pattern learn procedure.



19. Test-drive at a steady speed between 30-60 km/h (19-38 mph) for 10 minutes.



20. Check for Temporary DTCs or DTCs in the DTCs MENU with the Honda PGM Tester or the HDS.

Are any Temporary DTCs or DTCs indicated?



YES - If DTC P0341 is indicated, check for poor connections or loose terminals at the VTC oil control solenoid valve and the ECM/PCM, then go to 1. If any other Temporary DTCs or DTCs are indicated, go to the indicated DTC troubleshooting.



NO - Go to 21.




21. Monitor the OBD STATUS for DTC P0341 in the DTCs MENU with the Honda PGM Tester or the HDS.

Is it PASSED?



YES - Troubleshooting is complete.n



NO - If it is FAILED, check for poor connections or loose terminals at the VTC oil control solenoid valve and the ECM/PCM, then go to 1. If it is NOT COMPLETED, go to 19. and recheck.