Мультимедия RoadRover для Accord 8

[-=Arthur=-]

It's strange, especially for the shell where A2DP was confirmed by screenshots...Maybe it really requires some specific OS (WinCE) versions with particular driver/dll inside, or it depends on the model of the phone - I don't know. The only thing - I can disassamble those shells in a couple of days to check if there is indeed any code related to A2DP in them...

 

[-=Arthur=-]

Hi,
Unfortunately, these two software from you and this one from link (where they was working A2DP on screens) do not give me the effect of working A2DP profile on my device.

What do you exactly mean - you don't see the A2DP functionality inside the shell at all, or you see it but it does not properly stream the music from your phone?

I checked the V1.28.0 version which I posted before in my current car (BMW X1) RoadRover device and surprisingly I saw A2DP in it. However, I'm pretty sure I tested the same shell in my former Accord RoadRover unit with the same phone I use right now - and there was no A2DP option in Bluetooth menu of this shell...

 

[egon12]

What do you exactly mean - you don't see the A2DP functionality inside the shell at all, or you see it but it does not properly stream the music from your phone?

I checked the V1.28.0 version which I posted before in my current car (BMW X1) RoadRover device and surprisingly I saw A2DP in it. However, I'm pretty sure I tested the same shell in my former Accord RoadRover unit with the same phone I use right now - and there was no A2DP option in Bluetooth menu of this shell...

Hi,
I checked all old my shells and two newest - v.1.28 from you and this 1.28.0 USA from link and I do not see the A2DP button in BT menu. Looks like that my device does not support A2DP from FW level. I need to find newest MCU with A2DP support for my device.
Regards,
e12

 

[-=Arthur=-]

Hi,
Looks like that my device does not support A2DP from FW level.

Maybe...However, it's a bit strange that my current BMW MCU is sufficient for A2DP in this Accord shell, and the original Accord MCU not...

Anyway, to find a proper MCU firmware is not so easy, but there is still possibility that it could be related to OS (WinCE) fro which there are plenty of firmwares in the net. If you want to "dig" in that direction as well, you can find them here.

 

[egon12]

I can go also in to this direction ... I need to check all possibilities
Now I have ARM_SLC family, my current version is v1.51. Do you know compatibility with other branches (TMC, U1, 128MB) ? What are the differences ?
/e12

 

[-=Arthur=-]

TMC - insures that TMC driver for navigation software is inside
U1 - usually insure some features like 2 USB ports or correct Bluetooth for some specific devices (not very crucial)
128 - was introduced for recent 128MB firmares to separate from new I9/I10 devices having 256MB onboard (in your Accord it's also 128 MB)

The screenshot from my post shows all available OS firmwares which should be globally compatible with your device, however for some of them you can experience some local problems with Bluetooth\USB, I don't know ... And of course, EN-PRIMA-ARM-SLC-V1.51 is always available to restore to the initial state.

 

[egon12]

Hi,
I just make update my device to newest EN-PRIMA-128-V1.73 version. Unfortunately still the same effect No A2DP option under "Phone settings" line
/e12

 

[-=Arthur=-]

It's a pity - probably it's MCU indeed or some specifities of the Bluetooth-module which is built-in in the MCU of your Accord device.

Anyway, I don't see anything what I could propose you else...

 

[egon12]

It's a pity - probably it's MCU indeed or some specifities of the Bluetooth-module which is built-in in the MCU of your Accord device.

Anyway, I don't see anything what I could propose you else...

Hi,
OK, last chance Do you have a good source of MCU FWs ? I have only three old versions and all of them are not working with A2DP BT profile. Google search is also do not give me a good results.
/e12

 

[-=Arthur=-]

No, unfortunately only those posted here V4.13, V4.14, V5.19.

NOTE!
1. V4.XX are not fully compatible with V5.XX and vice versa (slightly different display controllers)
2. If you find something in the net - be sure it's a proper MCU for your RoadRover unit, otherwise there is a high risk of "death" for your device...

 

[Alexxx85]

Артур, ещё раз убеждаюсь, что ты тут непревзойдённый гуру!!) Даже иностранцам помогает, излагая всё на понятном для них языке!) Аплодирую стоя и жму руку)

 

[-=Arthur=-]

Артур, ещё раз убеждаюсь, что ты тут непревзойдённый гуру!!) Даже иностранцам помогает, излагая всё на понятном для них языке!) Аплодирую стоя и жму руку)

Привет! Это всё похоже от безделья

 

[rus451]

Правда ли можно сменить оболочку с d2280 на i9 имея на руках определенную прошивку mcu?

 

[-=Arthur=-]

Правда, только I9 под аккорд, с корректным выводом инфы с климата и со штатной магнитолы вроде как не существует...

 

[X_ray]

Господа ! куому надо подключить интернет к голове.

Нарыл очень подробную инструкцию на прадо клубе:

http://www.prado-club.su/forum/index.php?topic=50632.0

 

[manaxxx1991]

ссылки не работают. есть у кого последняя прошивка 5.19. и как там климат работает?

может у кого есть CN-PRIMA-ARM-SLC-V1.55 и EN-PRIMA-ARM-SLC-V1.51 и MCU V5.19 пришлите пожалуйста ссылку рабочую

 

[ALEX0206]

-=Arthur=-, Артур, подскажите! Возможно ли как-то подключить айпод к интро? Ведь штатный аукс теперь ек фурычит...

 

[FirZZt]

Сорри если не в тему, но есть проблема по этой голове.
Подключил Intro CHR-2288 AD в баян, всё кроме DVD (нет надобности).

При подключении провода "REMOTE" к 21-му проводу мафона управление с руля ведёт себя некорректно — при попытке убавить громкость она наоборот увеличивается, кнопка переключения следующего трека работает как кнопка "mode", сама кнопка "mode" вообще не работает. При отключении данного провода всё нормально но нет переключения песен (что для меня очень важно т.к. тянуться к дисплею каждый раз не айс, сами понимаете).
Парни, подскажите куда копать? Грешить на прошивку?

 

[evgenich nur]

Уважаемые ,а можно ли смотреть видео с ютуба если да то как это сделать

 

[Андрей 38]

кто нибудь знает как сбросить настройки на заводские intro CHR-2288 AD